| Which of the following is not a method of financial incentive payment? (a) Halsey premium plan (b) Bedaux premium plan (c) Rowan premium plan (d) Jhonson's premium plan |
| Ans : (d) |
| ..............organisation is also called as military organization : (a) Functional (b) Line (c) Line & staff (d) None of the above |
| Ans : (b) |
| Which is not a part of PDCA cycle (Deming wheel) |
(a) Do (b) Check
(c) Plan (d) Approve
| Ans. (d) |
| For a repairable product, the ratio of the time it is working satisfactorily to..............is called availability. |
| (a) the total down time (b) the test interval (c) the total up time (d) failure rate |
| Ans. (b) |
| In a closed loop process control system with PID controller, ............response depends only on the difference between set point and the process variable |
| (a) proportional (b) integral (c) differential (d) All of these |
| Ans. (d) |
| ............is the tool for organizing the workplace in a clean, efficient and safe manner to enhance productivity and enable standardized working. |
| (a) 5S (b) 3D (c) 6O (d) None of these |
| Ans. (a) |
| What is data mining used to aid in ? (a) Operational management (b) Analyzing past data to yield information of value in tactical management (c) Detecting patterns in operational data (d) Retrieving achival data |
| Ans : (c) |
| In order that linear programming techniques provide valid results (a) Relations between factors must be linear (Positive) (b) Relations between factors must be linear (Negative) (c) (a) or (b) (d) None of the above |
| Ans : (c) |
| Gantt chart provide Information about: (a) Break even point analysis (b) Production schedule (c) Material handling layout (d) Determining selling price |
| Ans. (b) |
| In manufacturing management, the term "Dispatching" is used to describe: (a) Dispatch of sales order (b) Dispatch of factory mail (c) Dispatch of finished product to the user (d) Dispatch of work orders through shop floor |
| Ans : (d) |
| The simplex method is the basic method for (a) Value analysis (b) Operation research (c) Linear programming (d) Method anlysis |
| Ans : (c) |
| Quering theory is associated with (a) Sales (b) Inspection time (c) Waiting time (d) Production time |
| Ans : (c) |
| Which of the following production system is characterised by the low production volume? (a) Project Production System (b) Job Shop Production System (c) Batch Production System (d) Mass Production System |
| Ans : (b) |
| Bin card is maintained by ______. (a) costing department (b) stores department (c) finance department (d) accounting department Ans. (b) |
| Re-ordering level is calculated as (a) Maximum consumption rate × Maximum re order period (b) Minimum consumption rate × Minimum re order period (c) Maximum consumption rate × Minimum re order period (d) Minimum consumption rate × Maximum re order period Ans. (a) |
| Which of the following is true for inventory control? |
| (a) Economic order quantity has minimum total cost per order (b) Inventory carrying costs increases with quantity per order (c) Ordering cost decreases with low size (d) All of the above Ans. (d) |
| Routing is essential in the following type of industry: (a) Assembly industry (b) Process industry (c) Job order industry (d) Mass production industry Ans : (a) |
| Which one of the following is a process under job evaluation ? (a) Job description (b) Job analysis (c) Job specification (d) All of the above Ans : (d) |
| The full form of ERP is (a) Enterprise Revenue Planning (b) Enterprise Recovery Planning |
| (c) Enterprise Report Planning (d) Enterprise Resource Planning Ans : (d) |
| The following activities are to be performed in a particular sequence for routing a product 1. Analysis of the product and breaking it down into components 2. Determination of the lot size 3. Determination of operations and processing time requirement 4. Taking makes or buys decisions The correct sequence of these activities is |
(a) 1, 2, 3, 4 (b) 3, 1, 2, 4
(c) 3, 1, 4, 2 (d) 1, 4, 3, 2
| Ans : (d) |
| Dispatching function of production planning and control refers to: (a) A dispatch of finished goods on order (b) Movement of in-process material from shop to shop (c) Authorizing a production work order to be launched (d) Dispatch of bills and invoices to the customer Ans. (c) |
| In a low volume production, the dispatching function is not concerned with issuing of which one of the following? (a) Work tickets (b) Requisition of raw materials, parts and components (c) Route sheets to production supervisor (d) Requisition of tools and facilities Ans. (b) |
Routing assists engineers in deciding in
advance
| (a) the flow of material in the plant (b) the methods of proper utilization of manpower |
| (c) the methods of proper utilization of machines (d) the layout of factory facilities |
| Ans : (c) |
| Routing prescribes the (a) flow of material in the plant (b) proper utilization of man power (c) proper utilization of machines (d) inspection of final product |
| Ans : (a) |
| Activities involved in production, planning and control system are listed below: 1. Planning 2. Loading 3. Scheduling 4. Despatching 5. Routing 6. Follow up The correct sequence of these activities in production planning and control system is: (a) 1, 3, 5, 4, 2, 6 (b) 1, 5, 3, 4, 2, 6 (c) 1, 5, 3, 2, 4, 6 (d) 1, 3, 5, 2, 4, 6 |
| Ans. (c) |
| Routing is essential in the following type of industry (a) assembly industry (b) process industry (c) job order industry (d) mass production industry |
| Ans : (a) |
| Routing in production planning and control refers to the (a) Balancing of load on machines (b) Authorization of work to be performed (c) Progress of work performed (d) Sequence of operations to be performed Ans. (d) |
| The routing function in a production system design is concerned with |
| (a) Manpower utilization (b) Machine utilization (c) Quality assurance of the product (d) Optimizing material flow through the plant Ans. (d) |
| Production scheduling is simpler, and high volume of output and high labour efficiency are achieved in the case of: (a) Fixed position layout/ (b) Process layout (c) Product layout (d) A combination of line and process layout Ans. (c) |
| In production, planning and control, the document which authorizes the start of an operation on the shop floor is the (a) Dispatch order/ (b) Route plan (c) Loading chart (d) Schedule Ans. (a) |
| The strategy that involves production of the amounts demanded at any given time is : (a) Production level strategy (b) Chase strategy (c) Subcontracting strategy (d) TQM strategy Ans : (b) |
| Gantt chart provides information about the : (a) material handling (b) proper utilisation of manpower (c) production schedule (d) efficient working of machine |
| Ans : (c) |
| Product layout is employed for : (a) batch production/ (b) continuous production/melele Glheeove (c) effective utilisation of machine ceMeerve keâe ØeYeeJeer GheÙeesie (d) all of the above/Ghejesòeâ meYeer Ans : (b) |